Traditional Air-cooled Radiator
The use of aluminum extrusion, shovel teeth, and tooth shaping to increase the area of the heat dissipation fins and improve the heat dissipation power
Aluminum extrusion | 6061, 6063 and other materials, the fin height is not more than 20 times the fin spacing, and the fin thickness is more than 1.5. |
Shovel tooth type | 1060 or 6063F material, the theoretical fin height is unlimited, the material is soft, usually the fixing hole needs to be used with the wire screw sleeve. |
Shaper | Since the fins and the base plate are combined, the thermal resistance is increased. |
Heat Pipe Radiator
On the traditional air-cooled radiator substrate, a sintered heat pipe is added to improve the temperature uniformity of the substrate and improve the heat dissipation power. The heat pipe is installed by pressing, gluing, and soldering.
Blown Plate Phase Change Heat Sink
The use of inflatable plates as fins has the advantages of high heat dissipation power, and the disadvantage is that the installation direction is determined by gravity.
Substrate Phase Change Heat Dissipation
Suitable for high-power heat dissipation requirements, the disadvantage is that the installation direction is determined by gravity.
